Semi-Circle Frame Designs… 

Please click on the design required to display a larger version of the image…

12 Semi-Circle Frame Designs to choose from...

We have designed 12 UPVC Semi-Circle Frame Designs to help your customers choose the style they require. All designs are part of our unique simple “10 Second Pricing Guide”. If you have a bespoke design you require that you dont see in our list, then please feel free to ask if your design is achievable. These UPVC Semi-Circle frames also known as Half Circles, Semis or half moon frames and can be used in a variety of situations such as Over House Front Doors, Log Cabins, Pods, Porches and much more. Please check the ordering notes at the bottom of the page when designing your Semi-Circle project…

Shaped Frame Ordering Notes...

Standard Frame Specification

  • All frames are manufactured using slim outer frame as standard unless alternative is requested
  • All beading comes properly fitted into frame & takes 28mm glass units
  • Where possible we will supply you glass sizes upon signed order confirmation. However If the frame has curves or radiating bars within it, actual glass manufacture size templates will be supplied instead.
  • Unless specified, frames will be internally beaded and face drained as standard
  • Frames have fully welded corners with mechanical mullions unless otherwise specified or agreed
  • Mechanical joints are machine scribed & hand finished
  • Reinforcing will always be fitted where practical

Ordering / Quoting

  • Orders / Quotations are preferred using the GableCraft Order Form which can be on our Downloads page.
  • This will always be the most up to date version listed here

Profiles We Work With

  • Please view the Profiles Stocked page  for a list of all the profiles we can work with
  • All profile brands are charged at the same price
  • For small width frames, please check if we can bend your specified profile to that size before ordering. In some cases we would have to specify the use of Rehau due to its bending properties

Templates

  • Arched templates need to be of the actual curve we are going to produce.
  • They need to be tidy without chunks out of them.
  • Templates can be card, paper, timber or any materials such as this.

Delivery Method & Lead Time

  • All Shaped frames will be delivered by GableCraft within coverage area. Most UK areas coverage with delivery FOC
  • Deliveries outside of coverage area will be made using a nationwide carrier
  • Frames delivered on carrier will be packaged using cardboard protective U-Channel or boxed & bubble wrapped.
  • Standard lead time is 10–14 working days
  • Please allow 10-14 working days for all Arches & Sunburst gable designs. For Arched sash doors, please allow 3-4 weeks

Gable & Raked Frame size guidance

  • Minimum overall frame height for sunburst is 700mm, if lower POA
  • For sunburst frames with curved transoms in, please refer to Arched Frame size guidance for that element of your frame
  • Always view size limit limitations for compatibility on appropriate pricelist before pricing
  • For pricing purposes only, maximum frame widths are shown against style. If your frame is larger than this please send to us for a quote.
  • We can weld upstands below 100mm, but if this is required POA
  • Depending on profile, the minimum pitch welded to a point is 17.5 degrees
  • Always view size limitations for compatibility before pricing
  • For pricing purposes only, maximum frame height is 1800mm, If larger POA
  • Whether your frame is to a point or has an upstand, the price remains the same

Arched Shaped Frame size guidance

  • For small width frames, please check if we can bend your specified profile to that size before ordering. In some cases we would have to specify the use of Rehau due to its bending properties
  • Always view size limit limitations for compatibility on appropriate pricelist before pricing
  • For pricing purposes only, maximum frame widths / heights are shown against style. If your frame is larger than this please send to us for a quote.

Opening Circle Guidance

  • Profile used for Opening Circles is Rehau S706 without exception
  • Minimum Diameter of an Opening Circular window is 585mm
  • Maximum Diameter of an Opening Circular window is 850mm
  • Hinge with be either a White or Black pencil hinge at the top
  • Silver folding cam stay at the base

Click on designs to see larger version...

Profiles stocked in popular colours from all major profile suppliers.

                            
                                

 

Contact us...

Address

GableCraft Ltd
Unit 4A
Harpings Road
Hull
East Yorkshire
HU5 4JF

Phone

01482 876680

Email

admin@GableCraft.co.uk

Pin It on Pinterest

Share This